BHBDL - ADHESIVE/SEALANT 262

  • MSDS: BHBDL
  • Manufacturer: LOCTITE CORP
  • Product Name: ADHESIVE/SEALANT 262
  • National Stock Number: 8030-01-142-3131
Product Identification

Product ID:ADHESIVE/SEALANT 262
MSDS Date:01/01/1989
FSC:8030
NIIN:01-142-3131
MSDS Number: BHBDL

Responsible Party
LOCTITE CORPORATION
705 NORTH MOUNTAIN ROAD
NEWINGTON, CT 06111

Emergency Phone: (203) 278-1280

Info Phone: (203) 278-1280

Preparer: STEPHEN REPETTO

Cage: 05972

Contractor
LOCTITE CORPORATION
ROCKY HILL, CT 06067-3910 US

Telephone: 860-571-5100

Cage: 05972

Ingredients

POLYGLYCOL DIMETHACRYLATES

Fraction By Weight: 70-75%


BIS-PHENOL A FUMARATE RESINS

Fraction By Weight: 15-20%


POLYETHYLENE, POLYETHYLENE RESIN

CAS: 9002-88-4

RTECS: TQ3325000

Fraction By Weight: 2-3%


SACCHARIN (SARA III)

CAS: 81-07-2

RTECS: DE4200000

Fraction By Weight: <2%

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


1-METHYL-1-PHENYLETHYL HYDROPEROXIDE (CUMENE HYDROPEROXIDE)

CAS: 80-15-9

RTECS: MX2450000

Fraction By Weight: <2%

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


SILICA, CRYSTALLINE - FUSED

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: <1%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


N,N-DIALKYLTOLUIDINES

Fraction By Weight: <1%

Hazards

LD50 LC50 Mixture:ORAL TOXICITY LD50 = >5000 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MAY CAUSE DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: MAY CAUSE DERMATITIS.
Medical Cond Aggravated by Exposure:SILICON DIOXIDE DUST HAS BEEN SHOWN
TO CAUSE PULMONARY EFFECTS.

First Aid

First Aid:INGESTION: DON'T INDUCE VOMITING. KEEP INDIVIDUAL CALM.
OBTAIN MEDICAL ATTENTION. INHALATION: DOESN'T APPLY. SKIN/EYE:
FLUSH WITH WATER.

Fire Fighting

Flash Point Method:TCC
Flash Point:>200F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:SOAK UP AN INERT ABSORBENT. STORE IN PARTLY
FILLED, CLOSED CONTAINER UNTIL DISPOSAL.

Handling

Handling and Storage Precautions:STORE <110F TO PRESERVE SHELF-LIFE.
AVOID PROLONGED SKIN CONTACT.

Exposure Controls

Ventilation:NOT NORMALLY NECESSARY
Protective Gloves:RUBBER, PLASTIC RECOMMENDED
Eye Protection:SAFETY GLASSES RECOMMENDED
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>300F
Vapor Pres:<5MM
Spec Gravity:1.05
Solubility in Water:SLIGHT
Appearance and Odor:RED LIQUID; MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Hazardous Decomposition Products:IRRITATING ORGANIC VAPORS.

Disposal

Waste Disposal Methods:BURY OR INCINERATE IN ACCORDANCE WITH EPA &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.